September 5, 2010
 
General Rules
GENERAL RULES (EXTRACT FROM FINA HANDBOOK 2005-2009)
The General Rules are extracted from the FINA Handbook 2005-2009 edition. The information listed is particularly useful for technical official who are performing as Clerk-of-Course (CoC).
Swimwear (Ref FINA Handbook GR 5)
GR 5 .1 The swimwear (swimsuit, cap and goggles) of all competitors shall be in good moral taste and suitable for the individual sports disciplines and not to carry any symbol which may be considered offensive.
GR 5 .2 All swimsuits shall be non?transparent.
GR 5 .3 In swimming competitions, the competitor must wear swimsuit in one or two pieces which shall not extend beyond the ankles, the wrists and the neck. No additional items, like arm bands or leg bands shall be regarded as parts of a swimsuit.
GR 5 .4 The referee of a competition has the authority to exclude any competitor whose swimsuit or body symbols do not comply with this Rule.
Advertising (Ref FINA Handbook GR 6)
GR 6.1 Identification in the form of logos on swimwear, i.e. swimsuit, cap and goggles, and pool deck equipment, i.e. track suits, official’s uniforms, footwear, towels and bags, is permitted in accordance with regulations established in the By-Laws (BL 7). A two-piece swimsuit shall, in relation to advertising, be regarded as one. The name and the flag of the country of the competitor or the country code shall not be regarded as advertisements.
GR 6.2 Body advertisement is not allowed in any way whatsoever.
GR 6.3 Advertising for tobacco or alcohol is not allowed.
By Laws - BL 7 Advertising (Ref FINA Handbook BL 7)
BL 7.1.1 Swimsuits
One (1) manufacturer’s logo of a maximum size of 20 square centimetres when worn. Where one-piece body suits are used, two (2) logos of the manufacturer shall be permitted, one above the waist and one below the waist of a maximum size of 20 square centimetres each when worn. These two (2) logos of the manufacturer shall not be placed immediately adjacent to each other. Where two-piece body suits are used, the two (2) logos of the manufacturer shall be placed on one part each.
One (1) flag and one (1) country name or code of a maximum of 20 square centimetres when worn.
One (1) sponsor’s logo of a maximum of 20 square centimetres when worn.
BL 7.1.2 Caps
One (1) manufacturer's logo of a maximum size of 20cm² (when the cap is not being worn) on the front
The FINA Partner logo from Yakult shall be printed on the right side of the cap - please use the logo artwork attached (.jpg and .eps formats)
The FINA Partner logo from Yakult shall be of 20cm² (H22.5mm x W90mm) size. Please refer to the attached FINA Generic Cap Rules.
o The FINA Partner logo from Yakult shall be printed in red (Pantone:199C) on a white background (box).
One (1) flag and country name (code) of the size of 32cm² on the left side of the cap
The athlete's name of the size of 20cm² on the left side of the cap
BL 7.1.3 Goggles
Two (2) manufacturer logos of maximum 6 square centimetres are allowed on goggles but only on the spectacle frame or band.
BL 7.1. 4 Athletes Bibs
The maximum size of the Bibs shall be 24 cm (width) x 20 cm (height).
The height of the digits on the Bibs shall be no less than 6 cm and no more than 10 cm.
The maximum height of the identification above the digits shall be 6 cm. The identification may display the name/logo of a Sponsor.
The maximum height of the identification below the digits shall be 4 cm. The identification may display the name/logo of the Host City.
The Bibs shall be printed in suitable colours in order to ensure maximum visibility of the digits.
The Bibs must be worn fully visible during Athletes’ introduction and award ceremonies.
Only one FINA Sponsor may be displayed on Bibs. However, there may be one sponsor for men and another for women at the same Championships.
Numbered Bibs
Award Bibs
BL 7.1.5 Pool deck equipment
Two (2) advertising identifications of which one shall be of the manufacturer logo are permitted, with a maximum size of 20 square centimeters each when worn for any of the clothing items listed below, and a maximum size of 6 square centimeters each for any of the accessories and equipment items listed below. Identification on clothing must be placed on the top breast side so that Bibs requested by FINA may be worn well visible below.
 T-shirt  Windbreaker
 Polo Shirt  Towels (6 square centimeters)
 Casual Shirt  Baseball Caps (6 square centimeters)
 Sweat shirt  Hats (6 square centimeters)
 Bath robe  Socks (6 square centimeters)
 Pants  Footwear (6 square centimeters)
 Shorts  Bags
 Skirts
BL 7.1.6 Any advertising identifications which are not indicated in these regulations are not permitted. In the event that any clothing contravenes these regulations, the competitor must immediately remove the offending item(s) and replace it/them with clothing that complies with FINA rules. In the event that the breach is not immediately remedied the competitor may be requested to wear attire provided by the Organizing Committee.

Top